Filter
Top Products
10
GB
When the unit is OFF.
Follow the same procedure as above for the ON and if required continue to the OFF
setting.
Cancelling the timer
In order to cancel the timer setting(s), push the
TIMER BUTTON.
UV light (optional)
Normally the blue UV light will be ON whenever the unit is connected to the
electricity. In order to turn the blue UV light off, push the UV BUTTON, the UV light
will go OFF and the UV icon on the LCD will disappear.
Pushing the UV BUTTON again will light the UV light.
When the front door opens, a micro switch cuts off the electricity.
Heater
The heating function may run together with the compressor or alone. The heater will
run only when the room temperature is below 25 °C.
To operate the heating function, press the
TEMP&HEAT BUTTON.
Room relative humidity
Normally the 2 digits indicate the relative humidity % in the room.
If the relative humidity is lower then 35% the 2 digit icon indicate
.
If the relative humidity is higher then 95% the 2 digit icon indicate .
Room temperature
Push the TEMP&HEAT BUTTON for 2 seconds and the LCD will indicate the room
temperature.
The unit is supplied with a scent emitter to fragrance
the air.
• take out the scent capsule from its bag
• take the scent emitter cover off by turning it and
pulling it out
• fix the capsule into its airy seat in the back of the
unit
• return the cover to its place.
SCENT EMITTER