Amcor 000E Air Conditioner User Manual


 
10
3
Specifications
Model Number ALD-12,000E ALD-12,000EH
Cooling Capacity 12,000 BTU/hr 12,000 BTU/hr
Heating Capacity N/A 12,000 BTU/hr
Power Consumption 950W / 8.4A 950W / 8.4A
Humidity Removal Capacity 65 Pts. / Day 65 Pts. / Day
Recommended room size* Up to 400 sq. ft. Up to 400 sq. ft.
Power Supply 115V / 60Hz / 1 Phase 115V / 60Hz / 1 Phase
Compressor Rotary Rotary
Refrigerant R-22 R-22
Fan Speed 2 2
Timer 1-12 hours 1-12 hours
Temperature Set Range 62
°
F - 90
°
F 62
°
F - 90
°
F
Unit Weight 65 lbs. 68 lbs.
Dimensions 16"W x 17"D x 30"H 16"W x 17"D x 30"H
Working Temperature Cooling: 62
°
F to 110
°
F Cooling: 62
°
F to 110
°
F
Heating: 41
°
F to 81
°
F
REMARKS:
The cooling capacity of the unit may be affected by the height of the ceiling,
quality of insulation, number of windows, etc.
Drainage
During the process of cooling, some water will be extracted from the air into the unit. Most of this water
is used to cool the unit and make it run more efficiently. This is a feature not found in most Portable Air
Conditioners. If the unit is operated in VERY HUMID air, water will collect in the container inside the unit.
If the Internal Water Container is full, the backlight on the LCD display will flash, the unit will shut off, and
it must be drained before it will re-start.
How to Drain the Unit
Use a Shallow Container or Dish
1. Turn off the unit.
2. Position a flat container or dish under the drain hole.
Do not allow the water to drip continuously into
the container, as it might easily overflow.
3. Remove the drain knob & rubber plug from
the drain hole.
The condensed water will drain out automatically.
4. When the container is almost full, replace the
rubber plug into the drain hole to stop the water.
Empty the container.
5. Repeat steps 2, 3 & 4 until all the condensed water
is emptied.
6. Once all the condensed water has been removed,
replace the rubber plug into the drain hole firmly.
The Full Water indicator should be off now.
7. Replace the drain knob.
8. Turn unit on, the unit will resume working.