Alvin HWE150 Indoor Furnishings User Manual


  Open as PDF
of 2
 
©2008 ALVIN & COMPANY, INC. • P.O. Box 188, Windsor, CT 06095-0722
Phone: 860-243-8991 • Toll-Free: 800-444-2584 • Fax: 860-242-8037 • Toll-Free Fax: 800-777-2896
www.alvinco.com
LIT-A8011-2 4/08
Lay main easel frame flat on floor with brass height
adjustment track facing up.
Carefully slide canvas support assembly from below into
slots and tracks in main frame, as shown in Figure 3.
Pull spring-loaded height-adjustment ring and set in the
third track position for the time being.
Loosen the two angle adjustment knobs and slowly lift
frame into the vertical position, as shown in Figure 4.
Tighten knobs when desired angle is reached.
Slide top bracket down over main vertical track and
secure with brass thumbscrew at desired height, as
shown in Figure 4.
Your easel is now ready to use. Enjoy!
3
4
1
2
3
Loosen brass thumbscrew on back of main vertical track.
Pull spring-loaded height-adjustment ring to release
locking mechanism from brass track. Slide canvas
support assembly up or down until desired height
is reached.
Retighten brass thumbscrew.
Please save these instructions for future reference.
To Adjust Height
5
6
Figure 3
Figure 4
7
Angle
Adjustment
Knobs
Height Adjustment Ring
Brass
Thumbscrew
Brass
Thumbscrew
Angle
Adjustment
Knobs
 previous