Filter
Top Products
1716
Blockages
Removing a blockage in the dust container.
Unfasten the 4 snaplocks by pushing them in the
direction of the arrow and remove the dust container
cover. Loosen the blockage e.g. with a screwdriver,
and tap it out.
Please fit a MEGAfilt
®
SuperTEX dust bag into the
vacuum cleaner before vacuuming it out.
Put the dust container cover back on and push in the
direction of the arrow until you hear the 4 clasps lock
into place.
!
Caution: The microfilters and permanent filters
must be cleaned after every blockage.
CLICK!
CLICK!
CLICK!
CLICK!
Cleaning the permanent filters and microfilters
When must the filters be cleaned:
Ⅲ
If the vacuum cleaner is used until the dust indicator lights up.
Ⅲ
After any operating problem,
i.e. after a blockage is cleared.
Ⅲ
At least every six months.
Unlock the filter holder by pressing in the two latches
and open in the direction of the arrow.
Remove the microfilter and permanent
filter and wash them by hand.
!
Caution:
After hand washing, both the
permanent filter and the white fleece filter
may only be replaced after a drying time of
approximately 24 hours