Nilfisk-ALTO UZ 934 Vacuum Cleaner User Manual


 
Original instruction 07
Electrical connection
Maintenance
Warranty
Always keep the cleaner in a dry place. The cleaner is designed for
continuous heavy work. Depending on the number of running hours –
the dust filters should be renewed. Keep the container clean with a dry
cloth, and a small amount of spray polish.
For details of after sales service contact Nilfisk directly.
Our general conditions of business are applicable with regard to the
guarantee.
Unauthorised modifications to the appliance, the use of incorrect
brushes in addition to using the appliance in a way other than for the
intended purpose exempt the manufacturer from any liability for the
resulting damage.
As specified in European Directive 2002/96/EC on old electrical
and electronic appliances, used electrical goods must be collected
separately and recycled ecologically.
Contact your local authorities or your nearest dealer for further informa-
tion.
Hazardous materials
WARNING
Vacuuming up hazardous materials can lead to serious or
even fatal injuries.
The following materials must not be picked up by the vacuum
cleaner:
• hazardous dust
hot materials (burning cigarettes, hot ash, etc.)
flammable, explosive, aggressive liquids (e.g. petrol, sol-
vents, acids, alkalis, etc.)
flammable, explosive dust (e.g. magnesium or aluminum
dust, etc.)
WARNING
The vacuum cleaner must not be used if the electrical
cable or plug show any sign of damage. Regularly inspect
the cable and the plug for damage. If this becomes dam-
aged, it should be repaired only by Nilfisk or an authorised
Nilfisk Service Dealer, in order to avoid a hazard.
Do not handle the electrical cable or plug with wet hands.
Do not unplug by pulling on cable. To unplug, grasp the
plug, not the cable. The plug must always be removed
from the socket outlet before starting any service or repair
work of the machine or the cable.