Filter
Top Products
10
CENTIX 60
CENTIX 60 PREMIUM
english
Fault Cause Remedy
‡ Voltage fluctuations > Impedance of power supply is
too high
• Use a suitable extension
cord (see sections 1, „Safety
instructions“, and 9.4, „Techni-
cal data“)
• Connect the cleaner to ano-
ther socket closer to the fuse
box. Voltage fluctuations over
7% should not occur if the im-
pedance at the transfer point
is ≤0.15 Ω.
9 Further information
9.1 Recycling the vacuum
cleaner
Make the old cleaner unusable
immediately.
1. Unplug the cleaner and cut
the power cord.
The cleaner contains valuable
materials that should be recyc-
led. Therefore, make use of your
local waste disposal site.
Contact your local authorities or
your nearest dealer for further
information.
9.2 Guarantee
Our general conditions of busi-
ness are applicable with regard
to the guarantee.
Subject to change as a result of
technical advances.
9.3 Tests and approvals
The vacuum cleaners must be
inspected regularly in accor-
dance with national accident
prevention regulations (in Ger-
many as specified in VBG 4 and
DIN VDE 0701 Part 1 and Part
3, at regular intervals and after
repairs or modifications).
The vacuum cleaner has been
approved in accordance with
IEC/EN 60336-2-2.