Nilfi sk ALTO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 51 -
Item Ref. No. Qty Description
10817KL 1 Squeegee Assy (STD)
1 25201B 2 Knob
2 34260B 1 Squeegee Gasket
3 81301A 2 Nut, Jam SS
4 60248A 2 Sleeve
5 30048A 2 Guide Wheel
6 81217A 2 Nut, 1/4-20 ESNA
7 80316A 2 Screw, ¼-20 x 1 Flat SS
8 38715A 2 Spacer (38)
9 62712A 1 Air Duct
10 37016A 1 Grip Pad
11 80011A 2 Screw, .375-16 x 3.00
12 30718L2 1 Blade, Inner Linatex (STD)
* 30718A 1 Blade-Front Gum Rubber (OPT)
* 30954A 1 Blade-Front Urethane (OPT)
13 30935L 1 Blade, Outer Linatex (STD)
* 30935A 1 Blade-Rear Gum Rubber (OPT)
14 62444A 1 Clamp, Weld
15 170932 2 Rivet
16 55722A 1 Squeegee Strap Latch
17 86004A 1 Screw, .25-20 x 1.50 Hex
18 62421A 1 End Clamp
19 54766A 2 Insert,Threaded 5/16-24
20 85702A 2 Screw, .25-20 x 1.75
21 64905A 2 T-Handle
22 85816A 2 Screw, .312-18 x 1.75
23 59971A 2 Wheel
24 65975A 2 Wheel Mount Bracket
25 920110 3 Nut, ESNA
26 81104A 6 Nut, Hex ESNA SS
27 69675A 1 Squeegee Base
* = Optional, Not Included
NOTE: When changing squeegee blades, it might be necessary to loosen screw #11; install and secure blades with clamp #14; then retighten screw
#11. This will allow for different thickness.
Nilfi sk ALTO
SCRUBTEC 795
Squeegee Assembly 12/09