AllerAir none Air Cleaner User Manual


 
ALLERAIR'S AIR PURIFICATION SYSTEM
LASER TESTED TRUE HEPA
HEPA (High Efficiency Particulate Arrestance) filters were developed for the Atomic
Energy Commission to remove radio active dust from their laboratories.The are now the
primary filtration systems for electonic clean room assembly, hospital surgeries, bio
engineering,pharmaceutical laboratories and any other space where clean air is critical.
HEPA will trap microscopic dust which will give you distress from allergies, asthma,
respiratory problems, chemical sensitivities and sick building syndrome. It will trap
99.97% of all particles down to 0.3 microns (including bacteria, dust mite antigens,
respiratory particles, fungal and other microbiologicals. For these reasons that HEPA
filtration is recommended by more allergists, medical professionals and clean air
consultants than any other filter system available.
CARBON FILTER (ACTIVATED AND GRANULATED)
We use only activated granular carbon mixed with zeolite and specially impregnated
carbons. We stay away from dust carbon which has been impregnated onto a poly or
foam material. This type of carbon filter has to be changed as often as every week to be
fully effective. AllerAir's carbon filter can last up to 2 or 3 years and more, depending on
the level of toxins in the area.
The activated carbon we use can adsorb up to 60% of its own weight in toxic gases,
fumes and chemicals. These toxic substances make us ill, and are found in every home,
office and industry.
OTHER FILTERING SYSTEMS AVAILABLE
Ozone generators, negative ion machines and elec trostatically charged units all
generate ozone which is a toxic substance. Any unit which provides ozone cannot be
recommended by Health and Welfare or by the Lung Association.
AllerAir's units on the other hand do not produce any ozone whatsoever. The latest air
purification technology does not add anything to the air (especially impurities like
ozone or P.V.C.s).AllerAir's unit scrubs impurities and toxins out of the air.
ENERGY COSTS
We use a high efficiency motor which cost pennies a day to operate in contrast to
almost all other manufactures who use the lowest price motor available. One of the
reasons we can offer ten year warranty is because of the sophisticated motor we use. We
have spared no effort to give you the most for the least.
ADDITIONAL INFORMATION
The AirMedic+ unit you have purchase is equiped with a variable speed control to allow
you to control the air flow and sound to a very low level.
The air coming out of the unit may feel cool to your hand,but the temperature of the air
is actually the same. And AllerAir units are specially designed to have no offgasing
because our entire unit housing is made of steel.
IMPORTANT NOTICE
To receive maximum use of HEPA filter media when used in freshly painted room, you
should first remove the HEPA filter from the unit to avoid contaminating the HEPA
media. Turn unit off and Unplug unit. Remove bottom screws. Open bottom of unit,
Grasp outer filter ring firmly with both hands and remove carefully. Close unit, plug into
grounded receptacle then turn on.Replace carbon filter before reinstalling HEPA filter.
Do not allow any object to be stuck or poked into any opening of the unit.
Never service the unit before turning unit off and removing electrical plug
from the wall receptacle.
AllerAir Industries Inc.
Toll free:1-888-852-8247 / F ax:1-877-688-2193 www .aller air.com
4 5
FILTER ASSEMBLY - Air Medic D
D Models have a 3" deep carbon filter.
STEP 7
Place lidback to itsproper
position by aligningthe arrow
with therearseam.
STEP 8
Replacethe fourscrews.
STEP 9
Turn theunit backonto its
wheels.Itis nowready for
immediate use.
STEP1
Turn Poweroff and
unplug receptacle.
Lay unitupside down.
STEP2
With a#2 Philips screw driver,
removethe fourscrews from
the bottom ofthe unit.
STEP 3
Gently grasp wheels.
Removebase bygently pulling
on thewheels
STEP 4
Removeonly oneof thewhite,felt,
donut-shaped gasketsfrom theinside
of thepurifier body.
STEP5
Insert thecarbon filter(either a
Model 600D Carbon)
STEP6
Replacethe gasket thathad been
removed in STEP4.