Filter
Top Products
1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.com
Door 23
8/10/08
Algoma Hardwoods, Inc. PC-7 is a
commercial door made with
particleboard core and skins.
Solid lumber outer stiles along
with Structural Composite
Lumber (SCL) rails and inner
stiles, are glued to the core prior
to cold pressing a 3-ply skin each side
of the core at ambient air temperature.
Algoma Hardwoods, Inc uses
only the better of two grades of
door core particleboard
conforming to ANSI Standard A208.1-
1989, Grade LD-1.
Algoma Hardwoods, Inc. uses
only skins with face veneers at
least .020” (0.5mm) thick at
12% moisture content.
Thickness 1
3
⁄
4
" (44mm) available FD
1
⁄
3
hour labeled.
Maximum size Available prefit up to 4'0" x 8'0" (1219 x 2743mm), 8'0" x 8'0" pairs.
Stiles (Edge bands) 1
3
⁄
8
" (35mm) prior to factory trimming, glued to core. Alternates: ME–matching edges or CE–compatible edges.
Top & bottom rails 1
3
⁄
8
" (35mm) prior to factory trimming, glued to core; Structural Composite Lumber (SCL).
Core Conforms to ANSI A208.1-1989, GRADE LD-1 covering mat-formed particleboard.
Faces Skins 0.10" (2.5mm) of several veneer species. Faces shall be a minimum of .020" (0.5mm) at 12% moisture content.
Adhesives Type II (interior).
Veneer matching Available in pairs.
Details Standard lites and louvers available not to exceed 40% of door area or 54" (1372mm) in length. Maximum glass opening on FD
1
⁄
3
hour doors is 1,296 sq. in. (0836m
2
) with wood beads and clips or metal vision panels. Applied mouldings also available.
Machining Available with hinge and lock machining as well as other hardware.
Finishing Available in 8 standard colors, and clear.
Warranty For interior, limited lifetime warranty. Exterior not warranted.
Standards met or exceeded WDMA I.S. 1-A Series, WOOD FLUSH DOORS, AWI Section 1300.
PC-7 FD
1
⁄
3
Hour Door
Product Features