Filter
Top Products
6
Reflector
Burner assembly
Base assembly with the
allast weight & Bracket
uel -line
Cylinder decorative cover
Post / the Slip socket cover
Regulator / hose assembly
Fastener package
Owner’s manual
Wheel Kit (optional part)
(
Figure 1)
1.4 LP gas hook up and
installation of the cylinde
r
1.4.1 Gas requirements:
Our heater is designed to use LP gas only, never substitute gases.
he heater comes with a regulator/hose assembly for hook up to a standard
20 pound (5 gallon) LP Overfill Protection Device and Type 1 fitting equipped
gas cylinder. The LP cylinder is not included. You need to purchase a filled
LP Cylinder that must be constructed and marked in accordance with
specifications of the U.S. Department of Transportation. Do not use dented or
rusty LP cylinder by your LP supplier.
Never use an LP cylinder with a damaged valve.
Do not modify the Regulator / hose assembly.
1.4.2 LP gas hook up (see Figure 2)
The heater is designed to house a 20 pound gas
cylinder on the base assembly.
Lift the cylinder decorative cover and
rest it on the triangular Socket.
Place the LP cylinder into the housing
on the Base, then attach the Regulator
/ hose assembly to the LP cylinder
valve. The regulator and the Cylinder
have right-handed threads (clockwise to
tighten).
Be sure this connection is tight but do
not over tighten on the LP cylinder valve. (Figure 2)