Filter
Top Products
For Continuous Drainage:
• Remove the drain knob and rubber
plug from the drain hole and retain it
for future use.
• Connect the included drain tube to the
drain hole.
• Connect the other end of the tube to a
drain (see Fig. 18).
FIG.17
• The drain tube may be extended by
adding an extension tube with a
suitable connector.
FIG.18
Please Note:
1. The drain must be at or below the
level of the drainage port.
2. The full water tank indicator will not
work when the unit is being
continuously drained.
FIG.19
3. To extend the drain tube, you can
connect it with another hose with an
overall diameter of approximately
0.7” (18 mm).
11
(OD:18MM)
K0080-1-2