NewAir AC-10000H Air Conditioner User Manual


 
The drainage hose may be extended by
adding an extension hose using a suitable
connector.
FIG.19
PLEASE NOTE:
1. The drain must be at or below the level
of the drainage port.
2. The full water tank indicator light will not
work when the unit is being
continuously drained.
3. To extend the drainage hose, you can
connect it with another hose with an
overall diameter of 0.7” (18 mm).
4. If room humidity levels are over 85%, it
will be necessary to continuously drain
the unit using the drainage hose.
Drainage hose
included with the unit
FIG.20
Drainage hose
included with the unit
Extension hose (OD: 0.7” )
For Heating Mode (only for model no. AC-10000H)
While using the heating function, please note the following:
1. In order to properly exhaust cool air, make sure the exhaust hose and window kit are
properly installed (refer to page 4 for instructions).
2. Set up the air conditioner for continuous drainage using the drain tube (refer to page 10 &
11 for instructions).
The working range for the heating function is 32° F to 68°F. The unit may not provide optimal
heating if used in temperatures outside this range
11