Filter
Top Products
11
enen
Option B: replace the whole cartridge
• Remove the cover (Caution: the mist outlet is loose!).
Remove the water tank from the base and unscrew the
water tank cap (17).
• The demineralization cartridge is attached to the inside
of the tank cap. Unscrew the cartridge from the cap by
turning it counter-clockwise (18). Important: do NOT
dispose of the water tank cap!
• Throw the whole cartridge into the waste (21).
• Unpack the new cartridge (23).
• Screw the cartridge on the water tank cap (25). Close
tank cap well, place the tank on the lower part and
insert mist outlet (26).
• Soak the new cartridge for 24h before use! The resin
must soak up water to reach full performance!
Cut the bag open at the marked point.
17
18 19
20
21
22 23
24 25
26