Airlink101 AWLH5026 Electric Heater User Manual


  Open as PDF
of 4
 
Section 3
Section 2
Configure the Wireless PCI Adapter
To open the Wireless PCI Adapter’s utility go to Start > (All) Programs >
Airlink101 MIMO PCI Utility > Airlink101 MIMO PCI Utility.
Step 1 Go to the AP List tab, select the SSID (Network Name) of the wireless
network you wish to connect to, and click Connect.
Step 2 If encryption is not enabled for the selected access point / router, skip to
step 6. Otherwise, enter a Profile Name for your wireless setting and click Next.
Step 3 Verify that the Network Name matches the SSID of your wireless network
and click Next.
 previous