Airlink101 AGIGAUSB Air Conditioner User Manual


  Open as PDF
of 4
 
Section 3
Step 8 Connect one end of the Gigabit Network Adapter to your computer’s USB
port and connect the other end to a hub/switch/router.
Step 9 At the Found New Hardware Wizard window, select No, not this time
and click Next.
Step 10 Select Install the software automatically (Recommended) and click
Next.
For Windows 2000, select Search for a suitable driver for my device
(Recommended) and click Next. Then check on the CD-ROM drives check box
and click Next.
Step 11 Click Continue Anyway at the Windows Logo Testing prompt.
(For Windows 2000, click Yes at the Digital Signature Not Found prompt).
Step 12 Click Finish to complete the installation.
Step 13 Restart your computer to activate the Gigabit Network Adapter.
 previous