Installing and
Connecting
Plug power cord to the nearest outlet.
Make sure the surface is dry (never place Airfree on wet fl oor or immerge in
water) Make sure side blue led is on.
Switch on dimmer (Available in Airfree P125,P80,P60) and the anti-stress
light should glow from the top lid (1). After 10 minutes the top lid should be
warm.
Place Airfree on the fl oor. Do not install it under furniture or shelves,
behind curtains as it will reduce air fl ow and Airfree effi ciency in reducing
microorganisms.
Place each Airfree in rooms up to 550 sq. ft. (51 m²) for P125 or
340 sq. ft. (32 m²) for P80 and 258 sq. ft. (24m²) for P60. For larger rooms
use proportionally additional Airfree units. The use of just one Airfree in
rooms larger than recommended will reduce Airfree effi ciency.
Airfree must be continuously on in the same room, 24 hours a day.
Airfree can only be used in rooms with minimum air volume of
330 cu. ft. (10 m3), free of obstacles.
Airfree can be installed in rooms equipped with air conditioning and heating
systems. However it is recommended not to place Airfree nearby them to
avoid potential interference in Airfree air fl ow.
Do not place Airfree in the corridor to try to reach the whole house. In this
case Airfree will only reduce air pollution in the corridor area.
Airfree is designed for indoors in rooms with their windows and doors rea-
sonable closed. However opening up windows in the morning for ventilation
will not affect Airfree’s effi ciency. Airfree is to be placed away from windows
and doors to avoid sterilized air to exit the room.
11