Filter
Top Products
CT20DXQD ELECTRIC BRUSH INSTRUCTIONS
INSTALLATION:
1. Read important safety instructions before installing powerhead.
2. Ensure vacuum cleaner is disconnected from power supply before
installing powerhead.
3. Connect extension wands from vacuum into powerhead’s neck.
STORAGE:
1. Ensure vacuum cleaner is disconnected before unplugging powerhead.
2. Disconnect wand from hose.
3. Remove powerhead from wand and store powerhead in a safe place.
CHANGING BELT:
1. Disconnect vacuum cleaner from power supply.
2. Remove screws from bottom of powerhead.
3. Remove base plate from powerhead.
4. Remove brush roll.
5. Replace old belt with new belt.
6. Insert brush roll back into correct spot.
7. Replace base plate and put screw back in.
CHANGING BRUSH ROLL:
1. Disconnect powerhead from electrical supply.
2. Remove screws from bottom of powerhead.
3. Remove base plate from powerhead.
4. Replace old brush roll with new brush roll.
5. Insert brush roll back into correct spot.
6. Replace base plate and put screw back in.
INTEGRATED WAND INSTRUCTIONS
The wand length is adjustable and requires no assembly.
To adjust, simply push down on the wand and adjust
button and slide to the desired height.
6