Filter
Top Products
35257 TURBINE INSTRUCTIONS
INSTALLATION:
1. Read important safety instructions before installing the turbine nozzle.
2. Ensure your central vacuum is not running before installing the turbine nozzle.
3. Connect the telescopic wand to the turbine nozzle.
STORAGE:
1. Ensure vacuum cleaner is disconnected before unplugging turbine nozzle.
2. Disconnect wand from hose.
3. Remove turbine nozzle from the telescopic wand store turbine in a safe place.
CHANGING BELT:
1. Insure power has been switched off at the central vacuum unit.
2. Remove turbine nozzle from the telescopic wand.
3. Remove screws from bottom of turbine.
4. Remove base plate from turbine.
5. Replace brush roll.
6. Replace old belt with new belt.
7. Insert brush roll back into correct spot.
8. Replace base plate and put screw back in.
CHANGING BRUSH ROLL:
1. Insure power has been switched off at the central vacuum unit.
2. Remove turbine nozzle from the telescopic wand.
3. Remove screws from bottom of turbine nozzle.
4. Remove base plate from turbine nozzle.
5. Replace old brush roll with new brush roll.
6. Insert brush roll back into correct spot.
7. Replace base plate and put screw back in.
RATCHET WAND INSTRUCTIONS
The wand length is adjustable and requires no assembly.
To adjust, simply push down on the wand and adjust
button and slide to the desired height.
6