Filter
Top Products
COLOUR CODED
PACKAGING
FOR EASY
RECOGNITION
COLOUR CODED
PACKAGING
FOR EASY
RECOGNITION
BS 5446:
Pt.1: 2000
Ei161RC
Ionisation
BS 5446:
Pt.1: 2000
Ei166RC
Optical
9
TEST Test all alarms from one convenient switch
HUSH Any nuisance alarm can be quickly and easily silenced
LOCATE Allows the source of the alarm to be identified.
MAINS The Test function will not operate without mains power,
CHECK providing a simple way to test the mains supply
MANUAL CALL POINT
MCP401RC Manual Call Point Surface Mount for use with all
Ei mains alarms
This simple remote smoke alarm control switch offers four vital
functions and can be positioned for convenient access,similar to
a light switch.Supplied with a suface box,it can be flush mounted
using a standard 35mm deep electrical socket box.
THE NEW Ei1529RC
CONTROL SWITCH
RC MODELS
The New 160 RC series
alarms can be used
effectively in larger and
more complex applications
including apartment
blocks, large houses, HMOs
and smaller commercial
premises. The alarms can
be integrated with a
number of additional
devices such as lighting
beacons, sounders, break
glass units and CO alarms
as part of a comprehensive
alarm system.
s With 10 Year+ Rechargeable Lithium Cells
First Choice
TEST, HUSH AND FIRE LOCATE
FROM AN ACCESSIBLE
SWITCH POSITION
New Aico RC Series smoke alarms are quick, simple and
economical to install, with all the control circuitry built into the
unit. There's no need for extra bases or terminals. All units use
the standard Aico Easi-fit baseplate and are compatible with
existing 160 series alarms if no control device is to be
introduced.
Wiring is equally simple.With the control and interconnect signals
being sent down the same cable,the wiring for a typical RC alarm
system is exactly the same as a standard interconnect mains alarm
system.This simplifies the wiring,cuts installation time and removes
the need for additional wires or cable types.