Filter
Top Products
Regulator
(Normal operating pressure 800-1000 PSI.
Pressure not to exceed 1000 PSI)
Liquid-Filled
Pressure Gauge
Outlet
To Misting Feed Line
Automatic
Drain Valve
Oil Filler/Breather Cap
Oil Sight Glass
Oil Drain
On/Off Switch
Power Cord
Water Inlet
Filter Bowl
With Replaceable 5-Micron Filter Element
LIST OF ALL ENCLOSED PARTS
QTY PART NO DESCRIPTION
1 60100K Direct-Drive Pump
1 56402 Flexible Nylon Tubing 25' Roll
1 52000 Automatic Drain Valve
57020 MAINTENANCE KIT
QTY PART NO DESCRIPTION
1 57011 Filter Element
1 57025 Pump Oil
• WARNING: Before plugging in the unit for the fi rst time, read the following section carefully. To reduce the risk of
electric shock. Plug in supplied grounded cord into a properly grounded receptacle. When servicing this unit, unplug
power cord before attempting any service or repairs.
• Install pump above grade level on a pre-formed concrete pad, 16"×16" minimum size.
• Plug power cord of unit into a properly grounded receptacle.
• Connect water line to water inlet connector.
• Unit is pre-fi lled with oil and ready to run. Oil should be half full on the sight glass when unit is off. Do not overfi ll
.
• On new misting systems, fl ush lines before installing nozzles. The pump will not build pressure until all nozzles are installed.
• Do not exceed 1000 PSI and do not run pump without water.
• Winter shutdown: Unplug pump power cord, shut off water supply, remove fi lter bowl and drain water. Also drain water out of all lines, to
prevent damage to pump or lines.
• 25 feet or more of nylon tubing is recommended in order to reduce vibration noise.
ANNUAL MAINTENANCE INSTRUCTIONS
• Change oil every 500 hours of runtime or once a year. Use approved Pump Oil (52025). Oil should be half full on the sight glass when
unit is off. Do not overfi ll
.
• Change Filter Element Annually
INSTALLATION INSTRUCTIONS
DIRECT DRIVE PUMP SPECIFICATIONS
MODEL FLOW VOLTS MOTOR PUMP LOAD DIMENSIONS
GPM 60 Hz HP RPM Amps L x W x H
60100K 1.0 120 0.75 1725 10.4 24x15x13
Maximum pressure is 1000 PSI, normal operating pressure is 800-1000 PSI.
RECOMMENDED MIN-MAX NOZZLE RANGE
NOZZLES NOZZLES NOZZLES
Nozzle Size .014 .012 .008
Nozzle Range 12–25 15–30 22–45
Choose .012/.014 nozzles for dry climates and .008 for more humid climates.