AEG 485 Vacuum Cleaner User Manual


 
9
Dear Customer
Thank you for choosing an AEG-
Electrolux Smart cleaner. To ensure
total satisfaction, read this
Instruction book carefully.
Features (see page 3)
A Mains cable
B Cable rewind button
C On/off button
D Suction control
E Cover release catch for dustbag
compartment
F Dustbag indicator
G Hose connection
H Carrying Handle
I Storage slot for floor nozzle and
extention tubes when not in use
J Storage slot for floor nozzle and
extention tubes when in use
K Accessory holder (integrated in the
rear of the cleaner)
Accessories (see page 4)
Dust bags
Telescopic tube
Swivel hose and handle with manual
suction control
Combination carpet/hard floor nozzle
Narrow crevice nozzle
Combination upholstery nozzle/brush
Safety instructions
The cleaner is for domestic use only
and has been designed to ensure
maximum safety and performance.
Please follow these simple precautions:
The cleaner is double-insulated so it
must not be earthed.
The cleaner is only to be used by adults.
Young children or infirm persons
should be supervised to ensure that
they do not play with the appliance.
Always store in a dry place.
Do not use to pick up liquids.
Avoid sharp objects.
Do not pick up hot cinder or lighted
cigarette ends.
Do not use near flammable gases.
Avoid tugging on the mains cable
and check cable regularly for damage.
WARNING: Do not pull the appli-
ance by the cord. Do not unplug by
pulling on the cord. Do not use the
cleaner with a damaged cable. If
the cable damaged, it should be
replaced at a service center. This is
not covered by the warranty.
The Plug must be removed from the
socket-outlet before cleaning or
maintaining the appliance.
All service and repairs must be carried
out by authorised AEG-Electrolux
service staff.
Getting Started
(see page 4)
Check the dustbag is in place.
Insert the hose until the catches
click to engage. (Press catches
inwards to release).
Attach the telescopic tube to the
hose handle and floor nozzle by
pushing and twisting together.
(Twist and pull apart to dismantle).
Extend the cable and connect to
mains. The cleaner is fitted with
cable rewind, ensure cable is not
twisted before use. (Press foot pedal
to rewind. Note: Please hold the
plug to prevent it striking you or
the machine).
Press the On/Off button to activate
the cleaner.
By moving the variable power
control, the suction power can be
adjusted.
Suction can also be regulated on
the hose handle by opening/closing
the aperture.