Admiral AAW-24CR1FHUE Air Conditioner User Manual


 
Saver
Mid
Mode
Auto
High
Low
Timer
2
1
2
3
8
9
8
7
3
5
6
4
1
BUTTON
Mode BUTTON
Timer BUTTON
The appliance will be started when it is energized
or will be stopped when it is in operation, if you
press this button.
Used to select the operation mode.
Used to set or cancel timer operation.
Remote control
Indication symbols of LCD on remote control:
4
High BUTTON
Used to select the mode.high fan speed
5
Mid BUTTON
Used to select the Mid mode.fan speed
6
Low BUTTON
Used to select the Low mode.fan speed
7
Auto BUTTON
Used to select the Auto mode. fan speed
9
Saver BUTTON
Used to select the mode.Energy-saving
The Above symbols are shown when the relevant mode is in use.
High fan speed
Medium fan speed
Low fan speed
Auto fan speed
Cooling
Fan only
Energy-saving
Signal transmit
When Changing modes during operation, sometimes the unit does not always respond at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
BUTTONS
Used to set room temperature in Cooling
mode or used to set time in Timer mode.
Temperature setting range is from 19 (66 )
to 31 (88 ).
Display set temp
Display set timer
Each time the Mode button is pressed, the
operation modeis changed in sequence:
COOLING FAN ONLY
COOLING
15
OPERATING INSTRUCTIONS
Used to set room temperature in COOLING
mode or used to set time in TIMER mode.
Temperature setting range is from from
19°C (66°F) to 31°C (88°F).
WAC 8-24 USER MAN FINAL 3/2/05 12:13 PM Page 17