Filter
Top Products
INTERCHANGEABLE CANOPIES
The canopy versions for the Sherborne range
are slab top stoves to which a low or high canopy
can be fitted after installation and are
interchangeable.
These are fitted as follows:
•To fit the interchangeable canopy (Fig 10c):
•Remove the front clamps.
•Tilt the canopy as shown in stage 1.
•Engage the rear clips and pull fully forward.
•Fit the front clamps and tighten.
•Fit the required blanking plates shown in stage 2.
Sherborne Wood & Multifuel Stoves 19
INSTALLATION
Fig. 10c