Filter
Top Products
Step 2 Step 3
Step 4
Step 1
Product Dimensions
18 1/16"
(45.9 cm)
5 7/16"
(13.8 cm)
17 5/16"
(44.0 cm)
Minimum of 3" (7.6 cm)
For Cartridge Change
This product is outfitted with inlet/outlet fittings. The fittings can be attached or removed from the system
without tools. Retention clips are semi-circular in shape with three internal tabs, bottom, center and top. Tab interlaces
withwindowsinthemanifoldheadneareachconnectionport.Clipisexibleandeasilyassembledfollowingthese
instruction and illustrations.
1. Insert fitting into manifold.
2. With fitting inserted into manifold port, snap clip into place beginning at the bottom window
3. Push center tab into center window.
4. Finally push top tab into top window.
How to Use the Inlet/Outlet Fitting Retention Clips
4