Filter
Top Products
3
SAFETY INFORMATION
The 3M
™
Benchtop Air Ionizer 963E is designed to generate and deliver a
stream of ionized air. Its intended use is to neutralize excess static electricity
buildup on electronic devices and work surfaces. It is meant to function as a
stand alone device. The Ionizer 963E is not intended to take the place of proper
grounding of personnel as the preferred method of controlling electrostatic
buildup and preventing hazardous discharge.
CAUTION
• The Ionizer 963E runs off 24VDC power, supplied by a universal power supply capable of converting
100–240VAC electrical service. Usage of the unit with the incorrect electrical voltage could result in
incorrect performance and an unsafe operating condition.
• The Ionizer 963E has no user-serviceable parts. Do not remove the grill or disassemble the unit in
any way. If service other than that recommended in this manual is needed, please contact 3M for
information. UNAUTHORIZED SERVICE WILL VOID THE WARRANTY.
• The Ionizer 963E is NOT designed for usage in hazardous environments where the possibility of
explosion or fire exists.
• When cleaning the Ionizer 963E housing or emitter points, verify that the unit is off and
disconnected from electrical power. Collected dirt on this unit should be removed regularly to
prevent accumulation that may result in fire.
Explanation of Signal Word Consequences
WARNING
:
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury and/or property damage.
CAUTION
:
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury and/or property damage.
NOTICE
:
Indicates a potentially hazardous situation, which, if not avoided, may
result in property damage.