A SERVICE OF

logo

7
PolyScience Vacuum Sealing Systems
CONTROLLER OVERVIEW
Power LED — This LED lights when the Vacuum Sealer is
plugged into the electrical outlet. It indicates that the unit is ready
for use.
Auto — Activates a vacuum cycle followed by a seal cycle.
The LED above this button is lit while this process is running.
Vacuum is released when the process is complete.
Pulse — Manually controls the vacuum process. Press and hold
the button to apply vacuum, release the button to pause the
process. The LED above this button lights when this function is
selected.
Seal — Immediately activates the sealing process when the unit
is operating or in Pulse. The LED above this button lights when
the unit is sealing. The normal sealing time is approximately 5
seconds.
Pulse Button
Power LED
Seal Plus
Button
Seal Button
Stop Button
Auto Button