1. Manuals
  2. Household Appliance Support
  3. York Support
  4. Furnace Support
Support User Manuals
Question About York Furnace None
Furnace not heating the house...

Trying to find the filter but it is not in the manual. Believe that if we clean the filter the furnace may start heating the house. The furnace is on but not doing anything.

Asked by Natasha on 03/12/2009 1  Answer

ManualsOnline posted an answer 15 years, 7 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

steven posted an answer 15 years, 6 months ago

0 So you're saying that the gas jets are ignited and shooting flame into the area where the blower blows air and yet you have no heat?? That is a bit puzzling. Anyway just remember that the filter is between the return air ducting (will run down the side of the furnace to the bottom) and will be feeding air to the blower section. This will be where the filter is. I'm not exactly sure how your install is giving you access to this area...but if there is no access then you may have to get a contractor out to cut you some access. Working with sheet metal is not something you will want to try to do without the correct tools and experience. As stated in other posts...I had central air installed and the "A" coil had filter stuff on the inside of it which shouldn't have been there but was. I had to disassemble part of the ducting to get into that area to vacuum all that crap out. If you are adventurous as I am then go for it. If not you better get a HVAC guy to come in and do it for you.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual