I no longer have lights and I can't figure out how to change the bulbs.

Asked by James on 12/07/2014 4  Answers

ManualsOnline posted an answer 9 years, 7 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 Take off the metal back, no need to remove from cabinet. The (2) light bulbs are near the bottom and also held in by springs. Pull the spring left to right or right to left depending which side bulb you are replacing. Unscrew bulb and replace, now work backwards and put back together. This job should take ½ an hour, if you have done the job before it would take 10 minutes.
Was this answer helpful?
0 From the front, remove glass cover.  Look for two nuts with covers on each side on the ember logs near back side.  Remove both by hand and lift the ember logs up and out.  You will see the 2 bulbs directly there.  Now remove bulb and test. If they still work then your brightness control knob is faulty!  You can order the part Y07-C26-P05 or you can just make a by pass connection which works just fine.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.