How do I take apart unit to clean & remove filter to clean. Removing from summer storage & it's really dusty inside on the fan blades & filter. It needs cleaning before use. Thank you.

Asked by Shauna on 01/21/2014 1  Answer

ManualsOnline posted an answer 10 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 I found this information from another consumer who found their manual and typed this up: 1. Remove tank from base. Turn upside down and unscrew filling cap. Fill tank with clean, cool, distilled, or tap water. Water temp should NEVER be too hot or too cold. Return tank to base and let sit for a few minutes. Be sure the filling cap of the tank is tightened firmly. 2. Plug power cord into a 110-120V AC wall outlet only. Turn power switch to "on" position. Power light will illuminate. Turn mist nozzle until desired level is being released. Aim nozzle away from furniture and walls. 3. Always turn humidifier off when water runs* out. Unit will continue to operate when tank is empty. *Humidifier will run up to 12 hrs on low; 6 hrs on high. DO NOT LET WATER SIT IN TANK FOR LONG. THIS CAN ENCOURAGE BACTERIAL GROWTH. Place unit on level surface away from direct sunlight. DO NOT ADD MEDICATION OF ANY TYPE INTO THE NOZZLE, BASE, OR WATER TANK. ALWAYS LEAVE ROOM DOOR PARTLY OPEN. DO NOT MOVE, TILT, OR EMPTY WHILE OPERATING. Mild bleach and water solution for cleaning, never detergent. Clean every 3rd day during use. Clean after long storage. Humidity varies from room to room. Aim for 30 - 50% relative humidity. If windows/ walls fog or frost, reduce mist intensity. If room too humid, ventilate by opening door or window; adjust mist intensity. I hope this helps you.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.