I am setting the option settings. For SEG 11 it won't let me enter a 5. Any suggestions? Thanks

Asked by Tom on 06/24/2009 2  Answers

ManualsOnline posted an answer 15 years, 5 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 When you entered the 10 segment press mode again and enter seg 11 and 12. If it does not allow you to enter segment 11 then consider that as segment 1 and restart entering all the segments you will eventually be able to enter the last segments. That is how I managed to enter them. My unit did start after but by fan and flap were not working when in cooling mode, I suspect it might be caused by a different problem.
Was this answer helpful?
0 My air conditioner turns on fine and after a while it closes and the lights start flashing. When this happens I turn the power on again and it works again but the problem starts approximately every half an hour. I already turned the power braker off and on and the problem persists.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.