The water reservoir is bone dry, but the red warning light is on. So the unit is stuck in `stop` mode. How to fix it?

Asked by D on 06/16/2014 2  Answers

ManualsOnline posted an answer 9 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0
I had the same problem, i just fixed mine. it's easy. unplug it first and give it a moment to discharge the capacitors so you dont get a shock..
1. remove the back cover by unscrewing and pulling it up and out. it may take some wiggling.
2. unscrew and remove the front cover - screws are at the top inside the back of the unit
3. face the front of the  unit. in the bottom left corner is a silver tube held in place by 2 screws. remove the bottom screw and slide the silver tube out to the left so its dangling on its wires.
4. beneath the silver unit is a panel held by 1 screw. unscrew it. the panel is long and flat...coax it out of the front of the machine from underneath everything it sits on. dont disconnect the wires tho. the panel is long, you can push from the back of the machine as well as pull from the front. wriggle it out.
5.  a piece of rectangular polystyrene will come with it . this is the float. on top of the long panel is a (reddish) switch. as the water rises, the polystyrene floats up and pushes on the switch. 
6. clean off the polystyrene and the water tray beneath it, check that the flap flaps freely.
7. carefully (live wires around!) plug in the air con and check that with the flap dropped down (not pushed up) the aircon unit works.
8 if so, hooray, reassemble everything. job done. 
Was this answer helpful?
0 Thanks your post helped but my switch was broken so I bypassed the switch until I can get a new one
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.