1. Manuals
  2. Household Appliance Support
  3. Lennox International Inc. Support
  4. Furnace Support
Support User Manuals
Question About Lennox International Inc. Furnace None
Furnace electrical problems...

The pilot light is lit. The power is on. All breakers are okay. But nothing happens when I turn the thermostat. My volt meter indicates power in the electrical wires, but something apparantly doesn't have power?

Asked by Travis on 11/24/2008 1  Answer

ManualsOnline posted an answer 16 years ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

rich posted an answer 15 years, 8 months ago

0 i just fixed a furnace at a friends place...breaker ok, disconnect switch ok, power ran down into furnace ok, i popped the initial device cover open in the furnace ( think it controls the blower). the connection between the device and the load had come loose...i checked all the other splices,reconnected the load wire, through on the switch and the furnace fired up...check all wiring down to the motor too, make sure no splices have come loose
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual