1. Manuals
  2. Household Appliance Support
  3. Kidde Support
  4. Smoke Alarm Support
Support User Manuals
Question About Kidde Smoke Alarm 1235
Chirping...

Here's the answer: Kidde is a piece of ****. DO they do anything to answer us> NO. Replace with another model.

Asked by andy on 11/17/2008 3  Answers

ManualsOnline posted an answer 16 years ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Peggy posted an answer 15 years, 7 months ago

0 I found a manual for these stupid chirping smoke detectors
Was this answer helpful?

Peggy posted an answer 15 years, 7 months ago

0 Reset the alarm. Most current model smoke alarms have a processor that retains certain error conditions, such as a weak battery. The error condition should reset when the battery is replaced but sometimes it does not and must be manually reset to clear the error. To reset an AC unit with a battery backup: Turn off the power to the smoke alarm at the circuit breaker. Remove the smoke alarm from the mounting bracket and disconnect the power. Remove the battery. Press and hold the test button for at least 15 seconds. The unit may chirp or alarm for a few seconds before going silent. Reconnect the power and reinstall the battery. The unit will chirp once when the power is restored and should not chirp afterwards." To reset a DC only unit: Remove the battery. Press and hold the test button for at least 15 seconds. The unit may chirp or alarm for a few seconds before going silent. Reinstall the battery. The unit will chirp when the battery is first connected but should not chirp afterwards. I think thew secret is how long you hold down the rest or hush button
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual