1. Manuals
  2. Household Appliance Support
  3. Kenmore Support
  4. Vacuum Cleaner Support
Support User Manuals
Question About Kenmore Vacuum Cleaner None
Please help find the manual for this Kenmore Canister Bag Vacuum Cleaner...

need manual for power head, belt broken and cannot open, no screws apparant

Asked by d on 11/23/2008 2  Answers

ManualsOnline posted an answer 15 years, 12 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Betty posted an answer 15 years, 7 months ago

0 1)Remove light cover by pressing in & lifting both sides. 2)Push in & turn bulb counterclockwise to remove. 3)Unscrew the cover screws. 4)Turn the powerhead over. To remove cover, insert screwdriver at cover tabs on both sides & twist to release tabs. 5)Turn the powerhead right side up. Press handle release pedal & lower the swivel. Tilt cover forward from back until front snaps free. 6)Carefully insert & twist screwdriver at each brush support to free brush from base. 7)Remove worn belt. 8)Install new belt over motor drive, then over brush sprocket. 9)Put it back together.
Was this answer helpful?

Betty posted an answer 15 years, 7 months ago

0 1)Remove light cover by pressing in & lifting both sides. 2)Push in & turn bulb counterclockwise to remove. 3)Unscrew the cover screws. 4)Turn the powerhead over. To remove cover, insert screwdriver at cover tabs on both sides & twist to release tabs. 5)Turn the powerhead right side up. Press handle release pedal & lower the swivel. Tilt cover forward from back until front snaps free. 6)Carefully insert & twist screwdriver at each brush support to free brush from base. 7)Remove worn belt. 8)Install new belt over motor drive, then over brush sprocket. 9)Put it back together.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual