1. Manuals
  2. Household Appliance Support
  3. Kenmore Support
  4. Sewing Machine Support
Support User Manuals
Question About Kenmore Sewing Machine MD 50 computerized
I have a new Kenmore MD 50 sewing machine. The bob...

I have a new Kenmore MD 50 sewing machine. The bobbin tread keeps bunching up on the bottom of my material as I try to sew. What is the problem?

Asked by Mary on 01/04/2014 1  Answer

ManualsOnline posted an answer 10 years, 4 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Rewarder User posted an answer 10 years, 2 months ago

5 I have been sewing for over thirty years I have two sewing machines, a long arm quilting machine and two ten needle embroidery machines. usually three things could be at fault. First make sure your needle is in properly. If it has a flat side on the shank that goes towards the back and it is inserted all the way up before you tighten the screw that holds it in. Second make sure your bobbin is not wound too loose. If it the thread wound too loose it'll feel soft. The third thing to check is your tension, if the top thread tension is too loose that'll cause the bird nesting on the bottom. Check your troubleshooting for Maxine settings. Good luck.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual