my cleaner runs but there is no suction. cuold the belt have come off, if so how do i put it back on or replace

Asked by Paul on 06/25/2009 6  Answers

ManualsOnline posted an answer 15 years, 3 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
1 The same thing happened to me. Replace the yellow ball that is in the used water resevoir.
Was this answer helpful?
1 After years of use the clear plastic sleeve in the front has debris caught in it causing a narrow entrance for the water. Although I tried to clean by putting water on the floor and sucking it up with the cleaner it still is clogged. I know you are not supposed to take it apart. Any suggestions?
Was this answer helpful?
0 solution to my problem was: in front of tank there is a moveable part of the tank that is over water enterance canal. it was tilled forward, no making proper fit. Tilted back in postion, solved problem. Thanks for everyone input
Was this answer helpful?
0 solution to my problem was: in front of tank there is a moveable part of the tank that is over water enterance canal. it was tilled forward, no making proper fit. Tilted back in postion, solved problem. Thanks for everyone input
Was this answer helpful?
0 solution to my problem was: in front of tank there is a moveable part of the tank that is over water enterance canal. it was tilled forward, no making proper fit. Tilted back in postion, solved problem. Thanks for everyone input
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.