I have a HT-9700 fan and I need to know how to get the grills off to clean inside the fan

Asked by brenda on 08/01/2011 2  Answers

ManualsOnline posted an answer 13 years, 2 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 Regardiing cleaning the ht9700 Honeywell fan. If you are are looking at the grille with it laying face up on a table, you will see 4 screws down inside. If you screw them each a little and then turn the fan upside down, the grille will lift off. Just tried this and it worked!!!! What a pain.
Was this answer helpful?
0 this from kaz.com which is the contracted service provider for these fans from the manual, the 4 screws on the double fan are actually on BACK of fan. REMOVAL OF THE FRONT GRILLE FOR CLEANING DO NOT remove the fan grille unless the fan’s power is turned off and the power cord is unplugged. • Gently lay the fan face down on a table (Fig. 9). • Remove the front grille by unscrewing the screws located on the back of the fan head using a standard phillips head screw driver. NOTE: The screws will remain attached to the rear housing to ensure they are not lost. Do not try to force the removal of the screws. • Lift the rear housing by the handle to separate from the front grille. • Re-assemble the fan by replacing the front grille and aligning the screw holes between the front grille and the fan body. Gently tighten the screws. • For storage, clean the fan carefully as instructed. Store the fan in the original packaging or cover the product to protect it from dust. CLEANING AND STORAGE Fig. 8 Fig. 9 CONSUMER RELATIONS
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.