Its not getting cold enough

Asked by Joseph on 07/02/2014 1  Answer

ManualsOnline posted an answer 9 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 Good Afternoon Balljoseph15, I understand that your Frigidaire air conditioner, model# LRA087AT7, is not getting cold enough. Please try the following: 1) Make sure the room temperature is not below 60 degrees F. Cooling may not occur until room temperature rises above 60 degrees F. 2) Temperature sensing element, located behind air filter, could be touching a cold coil. Straighten away from coil. 3) Try resetting to a lower temperature. 4) The compressor could have shut-off by changing modes. Wait approximately 3 minutes and listen for compressor to restart when set in the COOL mode. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful. -Best Regards-
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.