1. Manuals
  2. Household Appliance Support
  3. Emerson Support
  4. Thermostat Support
Support User Manuals
Question About Emerson Thermostat None
need help with thermostat product, Aux keep flash...

need help with thermostat product, Aux keep flashing, not running furnace

Asked by Marcel Okemow on 01/06/2014 1  Answer

ManualsOnline posted an answer 10 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Rewarder User posted an answer 10 years, 8 months ago

5 Note: Most thermostats have an automatic minimum temperature separation (in degrees) from the heating setpoint to the cooling setpoint. This is necessary so the unit cannot continuously switch back and forth between heating and cooling when the thermostat is set in the automatic changeover mode. This separation is called the “dead band” and is usually 2 degrees F. For example, if you place your cooling setpoint at 72, your heating setpoint cannot be higher than 70. If you would then increase your heating setpoint from 70 to 72, your cooling setpoint would automatically increase by that same 2 degree..!!
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual