1. Manuals
  2. Household Appliance Support
  3. Electrolux Support
  4. Air Conditioner Support
Support User Manuals
Question About Electrolux Air Conditioner BTU12000
A/C does not start by remote control or manual con...

A/C does not start by remote control or manual control. It automatically start and stop after a few minutes. No light seen at control panel

Asked by anis_rahman31 on 06/24/2013 1  Answer

ManualsOnline posted an answer 11 years, 5 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Chris posted an answer 11 years, 4 months ago

0 Good Afternoon anis_rahman31 - I understand that your air conditioner is turning on and off rapidly. Here are some simple troubleshooting tips to help resolve this issue: • When was the last time the filter was clean? Restricted air flow from dirty air filter can caused air conditioner to not cool properly. Make sure there is nothing blocking the airflow to the unit like blinds, drapes, furniture, etc which could restrict air distribution. • Verify that the plug is not damaged and try resetting the unit. This can be done by pressing the GFI plug on the unit. • Outside temperature very hot. Set FAN on high speed to bring air past cooling coils more frequently. • Outside condenser coil is blocked or dirty. Make sure the condenser coil is clean and not restricted by bushes, trees, debris or winter covers. If unit is a Through-the-Wall model make sure the proper grille has been installed. • Unit too large for the room. Use chart below to determine if unit is too large for the cooling area. If issue persists, I would suggest contacting an experienced service technician to determine the precise cause.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual