Dirt Devil Vacuum Cleaner None Belt got cut | ManualsOnline.com

Support User Manuals

Hi, Brush was not rotating, when we checked inside the belt got cut . So we changed the style 5 belt but again it got cut in the first vaccum. Will the belt rotating place(small rod from motor) will be rough or its should be soft ??? for us it is rough.. Please let me know how to rectify this problem. thanks, uma

Asked by uma on 12/09/2009 9 Answers

ManualsOnline posted an answer 14 years, 9 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Jody posted an answer 14 years, 9 months ago

0 try spraying WD-40 on both ends of the brush where it turns. That will be easier on the belt. the metal rod should be clear of debris.

Was this answer helpful?

Jody posted an answer 14 years, 9 months ago

0 try spraying WD-40 on both ends of the brush where it turns. That will be easier on the belt. the metal rod should be clear of debris.

Was this answer helpful?

Jody posted an answer 14 years, 9 months ago

0 try spraying WD-40 on both ends of the brush where it turns. That will be easier on the belt. the metal rod should be clear of debris.

Was this answer helpful?

Jody posted an answer 14 years, 9 months ago

0 try spraying WD-40 on both ends of the brush where it turns. That will be easier on the belt. the metal rod should be clear of debris.

Was this answer helpful?

Jody posted an answer 14 years, 9 months ago

0 try spraying WD-40 on both ends of the brush where it turns. That will be easier on the belt. the metal rod should be clear of debris. How do you use the power brush?

Was this answer helpful?

Jody posted an answer 14 years, 9 months ago

0 try spraying WD-40 on both ends of the brush where it turns. That will be easier on the belt. the metal rod should be clear of debris. How do you use the power brush?

Was this answer helpful?

Jody posted an answer 14 years, 9 months ago

0 try spraying WD-40 on both ends of the brush where it turns. That will be easier on the belt. the metal rod should be clear of debris. How do you use the power brush?

Was this answer helpful?

Jody posted an answer 14 years, 9 months ago

0 try spraying WD-40 on both ends of the brush where it turns. That will be easier on the belt. the metal rod should be clear of debris. How do you use the power brush?

Was this answer helpful?

Jody posted an answer 14 years, 9 months ago

0 try spraying WD-40 on both ends of the brush where it turns. That will be easier on the belt. the metal rod should be clear of debris. How do you use the power brush?

Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.

Ask a Question Request a Manual