1. Manuals
  2. Household Appliance Support
  3. Craftsman Support
  4. Sewing Machine Support
Support User Manuals
Question About Craftsman Sewing Machine 2142
needle threading...

I can't thread the needle

Asked by Calli on 06/24/2008 1  Answer

ManualsOnline posted an answer 16 years, 5 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Barbara posted an answer 15 years, 7 months ago

5 It'[s very simple. Put the thread on the rod sticking up on top of the machine Bring the thread left at the back of the top to the little curly q loop hole. Then bring it towards you through the quirly q loop at the front of the machine. Then take the thread straight down through the 2 tension disks which tention 3-4 are safe settings. Then bring it up to your left and hook it over the hook that moves up and down when you turn the wheel. From there bring it straight done and run it through all the little hoops then through the eye of the need. The needle hole should face you with the carved out part to the back of the machine. To wind the bobbin. Put a bobbin on the sunk in rod closest to the right big wheel on top. ZPush the rod with the bobbin to the right. Hold the big wheel and turn the little wheel to disengage the up and down motion. Put the thread on the tall rod on top the machine. Run through the thread through the q loop in the back top. bring it around the little fat stump like metal rod in the center of the top and then back to your right and wrap around the bobbin. Step on the petal and fill the bobbin. Pop it back to the left and place the filled bobbin in the bobbin case underneath the needle in the bottom from by pulling the thread out the slash in the bobbin case. For photos or youtube walk through visit my website and contact me.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual