1. Manuals
  2. Household Appliance Support
  3. Bryant Support
  4. Thermostat Support
Support User Manuals
Question About Bryant Thermostat TSTATBBNB001
heater dosen't seem to be geting hot enough...

got a bryant thermostste model#TSTATBBNB00. When i turn on heat the air dosnt seem to be as hot as should be. i am use to a regular cent.HVAC unit this is a heat pump set up. Even if you put hand 1" from vent it dosent seem much warmer than ambient Temp. i got a double unit one for upstairs and one for down but they are not on same thermostate same problem upstairs also the house and unit approx.2yrs old. and also the TEMP.reads about 8 to 9 deg. higher than actual temp.

Asked by wesley on 02/23/2009 2  Answers

ManualsOnline posted an answer 15 years, 7 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

wesley posted an answer 15 years, 7 months ago

0 when heater cuts on it sounds like there is water runing inside the wall its a heat pump set up. i am hearing it up stairs in daughters room and the unit is located on same side as her room but it is on the ground level and the noise is up on the second floor and also when the heater cuts off it sounds like it is leaking down around were the lines tie in to the unit...........i also sent a request subject was heater dosent seem to get hot enough may help
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual