We are moving the unit and cannot locate the manuals

Asked by Larry Glanco on 10/13/2008 5  Answers

Bill posted an answer 6 years, 6 months ago

5 My furnace blower kick in but the furnace it self does not. It blows only cold air. Any Ideas as to what might be cause this to happen?
Was this answer helpful?

Victor Smolinski posted an answer 3 years, 7 months ago

5 one or more safety switches may be open not allowing the gas valve to energize, or the board may be defective.
Was this answer helpful?

Michael posted an answer 3 years, 7 months ago

5 Got it from the Bryant site
Was this answer helpful?

jeff posted an answer 3 years, 5 months ago

5 victor is correct . This just happened to me . there is a thermal cut-out below the pilot housing . if removing the leads from there and connecting them to each other makes your furnace run properly , then you will need to replace this part . my furnace guy who is a friend only asked me for 35 dollars ! I gave him 50 even though he didn't want to take it .
Was this answer helpful?

rod posted an answer 2 years, 3 months ago

5 I found this manual. Download.pdf
Was this answer helpful?

Add Your Answer