1. Manuals
  2. Household Appliance Support
  3. Bryant Support
  4. Furnace Support
Support User Manuals
Question About Bryant Furnace 395CAV, 373LAV, 376CAV,383KAV
Furnace will not recycle on "heat"....

The ignitor will light the natural gas flow, but after it shuts off, and the thernostat calls for "heat" again it will not start the vent blower and go thru the ignition process. I installed anew CESO110057-02 control board a month ago. It worked fine then, but wil not do it now.

Asked by Michael on 10/16/2008 3  Answers

ManualsOnline posted an answer 15 years, 11 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

rob ryan posted an answer 15 years, 8 months ago

0 Could be the blower motor or capacitor, T-stat problem or limit safety. When the blower wont start is when you need to troubleshoot
Was this answer helpful?

Michael posted an answer 15 years, 8 months ago

0 I eventually was told that the flame sensor was not putting out enough current, when the burners were on, so it is locked out for three hours. A new Thermocouple fixed the problem.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual