1. Manuals
  2. Household Appliance Support
  3. Bryant Support
  4. Furnace Support
Support User Manuals
Question About Bryant Furnace 373LAV
373LAV036050...

Could flame sensor be bad if gas does not ignite? Both blower & induced blower start and gas valve opens. Hot surface ignitor has been replaced

Asked by Phillip on 05/21/2010 3  Answers

ManualsOnline posted an answer 14 years, 6 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

robbie posted an answer 14 years, 6 months ago

0 yes absolutely. clean the sensor carefully with a scotch green pad. just lightly "sand" it with the pad, and then wipe with a clean lint free cloth. your furnace should light up normally after this. usually not necessary to replace it.
Was this answer helpful?

steve posted an answer 13 years, 10 months ago

0 where is the flame sensor
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual