1. Manuals
  2. Household Appliance Support
  3. Brother Support
  4. Sewing Machine Support
Support User Manuals
Question About Brother Sewing Machine vx 950
manual...

require a manual

Asked by william on 07/17/2008 9  Answers

ManualsOnline posted an answer 16 years, 5 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

darla posted an answer 16 years, 4 months ago

5 awesome sewing machine. first go get an air can like the type used to clean computer keyboards etc and blow the crap out of every nook and cranny then take a small stiff brush and brush out everything you can reach then blow it out again. follow that up with 3 in 1 oil or good sewing machine oil on every part that moves. wipe it down with a lint free cloth sew a foot or so on a scrap then go to www.sewusa.com to get the informantion on setting the tension on top and bottom and you should be all set!
Was this answer helpful?

JohnyG posted an answer 11 years, 10 months ago

3 hillow11....TANGLED THREAD: I had the same problem. Turned out I had not replaced the bobbin case retaining springs correctly. If you're just fiddling about with cleaning it's easy to slide them into place and it seems fine. Not so - the springs must be lifted a bit with the tip of your finger and then slide them a bit more toward the center and then release them and let them pop onto tiny pins that lock into small holes you cannot see on the backsides of the springs. The pins lock them in place securely. Missing that detail, my tread was getting twisted. Worse, my bobbin rotation was sometimes hitting on itself and locking up the whole machine. You can find manuals online for download in Acrobat PDF format. It does call for oil. The lamps are an obsolete model and hard to find. I've had one on order locally for months. You can order online for the about same cost including shipping: http://www.sewingpartsonline.com/light-bulb-push-in-9v3w-x50228001.aspx
Was this answer helpful?

Julie posted an answer 15 years, 8 months ago

1 Any ideas about finding a replacement light bulb? THanks.
Was this answer helpful?

Krista posted an answer 16 years, 4 months ago

0 My mother got a Brother VX-950 sewing machine about 15 (if not more) years ago. I (her daughter) now sew and every time i use the machine, the thread gets tangled. My grandmother said that we should clean the machine because it could have a lent build-up. I looked for the manule and found out that it was thrown away. I don't have enough money to buy a new machine and the one i have is just dirty. I would appreciate it if you could give me any advice, it would be greatly appreciated thankyou for your time
Was this answer helpful?

Michelle posted an answer 16 years, 3 months ago

0 I too have a vx-950 that was my mother's. I use it every week. I don't have a manual, but I know it's a machine that should not be oiled.
Was this answer helpful?

Debbi Lehr posted an answer 15 years, 4 months ago

0 Does anyone know how to do the automatic buttonholes on the VX-950? I've lost my manual and it's been years since I've tried a buttonhole. In the meantime, I'll keep hunting for that very old manual. Thanks.
Was this answer helpful?

JT posted an answer 11 years, 11 months ago

0 VX-950 manual: http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_VX_940_950_EN_6951.PDF. Buttonhole directions start on page 30.
Was this answer helpful?

Lisa posted an answer 10 years ago

0 A photo would be nice......
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual