1. Manuals
  2. Household Appliance Support
  3. Beckett Support
  4. Burner Support
Support User Manuals
Question About Beckett Burner AFG Oil Burner
nozzle...

Which is the best way to change the nozzle?

Asked by James on 10/23/2008 5  Answers

ManualsOnline posted an answer 15 years, 11 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

john posted an answer 15 years, 10 months ago

5 THANK YOU-YES!!!!
Was this answer helpful?

andre posted an answer 15 years, 10 months ago

5 Be very careful of the electrode the ceramic on it must not be crack or else you will have miss fire when the burner start, you should verify the proper adjustment for the electrode and remove them before changing the nozzle that you wont break them and you can readjust the electrode at the end for witch you need to a 5/32" gap between the electrode at 1/16" from the front of the nozzle that is going to put the tip of the electrode at 5/16" from the center line of the nozzle
Was this answer helpful?

ivan posted an answer 15 years, 10 months ago

4 There are two screws with hold down tabs on the back of the transformer (big black box on top). undo those and the transformer hinges forward. Everything you see inside there will come out when you undo the copper lines on the left side. The nozzle is at the very end aimed between the two electrodes. Hold the nozzle adapter with a 3/4 and turn off the nozzle with a 5/8.
Was this answer helpful?

ted posted an answer 15 years, 5 months ago

0 hi, have a beckett burner in a ARCO hot air furnace, made in canada which bangs boms and rattles wen running. it is a royal pain, and i think it can run quiter like when i firest got it! I AM WONDERING IF THE ELECTRODES ARE OUT OF POSITION, WHAT SAY YOU. TED VALCIS.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual