1. Manuals
  2. Household Appliance Support
  3. Armstrong World Industries Support
  4. Furnace Support
Support User Manuals
Question About Armstrong World Industries Furnace None
heat shutting off...

heat will periodically shut off and blow air (no heat) hitting the reset button to fire up heater, will sometimes run ok for a while but then shut off and go back to blowing cold air

Asked by Ken on 01/25/2009 1  Answer

ManualsOnline posted an answer 15 years, 9 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Christopher C ALexion posted an answer 15 years, 8 months ago

0 I had this same issue when we first fired up the furnace after refilling the oil tank. It could be air in the line. Put a bleed hose over the drain nipple/valve at the bottom of the pump and crack it open while the pump kicks on. (Drain the oil into a small can.) It will be cloudy (bubbly) for a few seconds, then will turn clear. When it's clear, tighten the valve. Note: a 5/16 or 7/16" boxed end wrench works best for this job.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual