®
®
Addendum to the
Side Burner Installation
Prior to attaching side burner hose: Remove
the protective brass cap from the side burner
fitting.
Caution: Make sure gas supply is turned off;
e.g.: L.P. cylinder valve off, natural gas shut off
valve turned off.
Use a 11/16 open end or an adjustable wrench to
remove the protective brass cap from the side
burner fitting on the manifold. Figure 1 for a Genesis
3. Figure 2 for a Genesis 5.
Caution; when removing the cap you may
require a second wrench to "hold" the side
burner fitting to keep it from loosening.
If the side burner fitting should loosen, tighten,
before attaching side burner hose.
Follow the step in your Owner's Manual for side
burner installation.
WEBER-STEPHEN PRODUCTS CO.
PALATINE, ILLINOIS 60067
4736912 1/89
Figure 1.
Genesis 3 Manifold
Genesis 5 Manifold
Figure 2.
View from
below and
behind
Side Burner
Fitting
Side Burner
Fitting
View from
below and
behind
®
®
Addendum to the
Side Burner Installation
Prior to attaching side burner hose: Remove
the protective brass cap from the side burner
fitting.
Caution: Make sure gas supply is turned off;
e.g.: L.P. cylinder valve off, natural gas shut off
valve turned off.
Use a 11/16 open end or an adjustable wrench to
remove the protective brass cap from the side
burner fitting on the manifold. Figure 1 for a Genesis
3. Figure 2 for a Genesis 5.
Caution; when removing the cap you may
require a second wrench to "hold" the side
burner fitting to keep it from loosening.
If the side burner fitting should loosen, tighten,
before attaching side burner hose.
Follow the step in your Owner's Manual for side
burner installation.
WEBER-STEPHEN PRODUCTS CO.
PALATINE, ILLINOIS 60067
4736912 1/89
Figure 1.
Genesis 3 Manifold
Genesis 5 Manifold
Figure 2.
View from
below and
behind
Side Burner
Fitting
Side Burner
Fitting
View from
below and
behind